Today, we have the Epson EcoTank 2720, and we’re going to solve a print head issue. If you’re dealing with poor print quality, missing colors, or choppy prints, this method will help you fix the problem. Let’s get started!

Step-by-Step Repair Guide for Epson ET-2720 Not Printing

1. Preparation and Initial Checks
  • Print a Nozzle Check: Begin by going into your Epson ET-2720 printer settings, select maintenance, and print a nozzle check. This will help you determine which color is causing the issue.
  • Unplugging the Printer: Print another nozzle check, but this time, unplug the power cable once you hear the print head moving. This will allow you to access the print head without causing any damage.
2. Accessing the Print Head
  • Remove the Screws: Use a Phillips screwdriver to remove the four screws on the top of the printer. These screws are located in the corners and can be a bit tricky to reach.
  • Lift the Printer Top: Carefully lift the top of the printer. You’ll need to use a pen to prop it up for unobstructed access. There are slots provided for this purpose.
3. Cleaning the Print Head
Solved: Epson ET-2720 Not Printing 4
  • Place a Paper Towel: Lay a full, long paper towel flat under the print head. This will soak up the cleaning solution and any excess ink.
  • Using the Cleaning Kit:
    • Remove the tubing for the color that’s causing issues.
    • Attach the syringe from the best printer’s cleaning kit to the nozzle and push the cleaning solution through.
    • At the 10 ml mark, move the print head slightly to ensure the paper towel absorbs all the liquid.
4. Reassembling the Printer
  • Remove the Soaked Paper Towel: Carefully remove the soaked paper towel and dry the area around the print head.
  • Replace the Ink: It’s crucial to have a fresh set of ink. Running low on ink can hinder the cleaning process and affect print quality.
  • Reattach the Tubing and Screws: Make sure to reattach the correct tubing to the print head and replace all the screws securely.
5. Testing and Final Steps
  • Print Multiple Pages: After reassembling, print multiple pages to ensure the ink is flowing properly through the cleaned print head.
  • Check Print Quality: Perform another nozzle check to verify that the cleaning has improved the print quality.

Important Tips and Additional Information

  • Purchase Fresh Ink: Always use fresh ink when performing this repair. Low ink levels can compromise the process.
  • Cleaning Kit: The best printer’s cleaning kit is essential for this process. It includes everything you need to clear clogs and restore print quality.
  • Be Patient: It might take a few prints to fully restore the ink flow and achieve optimal print quality.

Video: Epson ET-2720 Not Printing

Solved: Epson ET-2720 Not Printing

Conclusion

I hope this guide helped you fix your Epson ET-2720 print head issue. If it did, please like, share, and subscribe to my channel for more repair videos. If you have any questions or need further assistance, leave a comment below. Thank you for watching, and until next time!