Welcome to our troubleshooting guide. Today, we’ll walk you through how to fix the “Airprint Printer Not Found Iphone” error message on your iPhone. This common issue can occur even if your printer is connected to your network and has worked before. We’ll start with basic troubleshooting steps and progress to more advanced solutions. By the end of this guide, you should be able to resolve the error and print wirelessly using AirPrint.

Understanding the Airprint Printer Not Found Iphone Issue

The “No AirPrint Printers Found” error indicates that your iPhone is unable to locate the AirPrint-compatible printer on the network. This could be due to several reasons, including network issues, printer status problems, or configuration errors.

Basic Troubleshooting Steps

1. Check Wi-Fi Connectivity

First, ensure that your iPhone and printer are connected to the same Wi-Fi network. AirPrint requires both devices to be on the same network to communicate.

  • On your iPhone:
    • Open Settings.
    • Tap Wi-Fi and check the network name.
  • On your printer:
    • Refer to the printer’s manual to check its network connection status.
    • Ensure it is connected to the same network as your iPhone.

2. Verify Printer Status

Ensure that your printer is functioning correctly:

  • Paper and Ink: Check that there is enough paper and ink or toner.
  • Printer Errors: Look for any error messages or warning lights on the printer.
  • Power Cycle the Printer: Turn off the printer, unplug it for a minute, then plug it back in and turn it on.

3. Restart Your Devices

  • Restart your iPhone:
    • On iPhone 8 and later: Quickly press and release the volume up button, quickly press and release the volume down button, then hold the side button until the Apple logo appears.
  • Restart your Printer:
    • Turn off the printer, wait for 10 seconds, then turn it back on.

4. Close and Reopen the App

If you’re trying to print from an app like Files or Photos:

  • Close the app by swiping up from the bottom of the screen (or double-click the home button on older iPhones) and swiping the app up to close it.
  • Reopen the app and try printing again.

Advanced Troubleshooting Steps

If the basic steps didn’t resolve the issue, try the following advanced troubleshooting methods.

1. Change the Printer’s USB Port Digitally

If you use a USB-connected AirPrint printer with a network router, you may need to change the printer’s USB port configuration:

  1. Open Settings:
    • Go to the Start menu on your computer and click on Settings.
  2. Access Printers:
    • Navigate to Devices > Printers & scanners.
  3. Open Devices and Printers:
    • Click on Bluetooth and other devices.
    • Then, click on Devices and printers.
  4. Select Your Printer:
    • Locate your Zebra printer from the list.
    • Right-click on the printer’s icon and select Printer properties.
  5. Change the Port:
    • In the Printer properties window, click on the Ports tab.
    • Select a different USB port (e.g., from USB001 to USB002).
    • Click Apply and then OK.
  6. Test Print:
    • Go back to the General tab and click Print Test Page.

If the printer still doesn’t print, repeat these steps, selecting different USB ports until successful.

2. Restart Your Router

Network issues can often be resolved by restarting your router:

  • Unplug your router for about 30 seconds, then plug it back in.
  • Wait a few minutes for the router to fully restart and establish a connection.

3. Toggle Airplane Mode

Turning Airplane Mode on and off can reset network settings and help resolve connectivity issues:

  • Swipe down from the top right corner (or up from the bottom on older iPhones) to open Control Center.
  • Tap the airplane icon to turn on Airplane Mode.
  • Wait a few seconds, then tap it again to turn it off.

4. Reset Network Settings

If the problem persists, you might need to reset your iPhone’s network settings:

  1. Open Settings:
    • Go to General.
  2. Reset:
    • Scroll down and tap Reset.
    • Select Reset Network Settings.

This will reset Wi-Fi networks and passwords, cellular settings, and VPN/APN settings that you’ve used before. You’ll need to reconnect to your Wi-Fi network afterward.

5. Update Your iPhone

Software updates can fix bugs and improve device compatibility:

  • Open Settings:
    • Go to General > Software Update.
  • If an update is available, tap Download and Install.

Contact Printer Support

If you’ve tried all the steps above and still can’t resolve the issue, it might be a problem with the printer itself. Contact the manufacturer’s support for further assistance. Provide them with your iPhone’s model number and iOS version, which you can find in Settings > General > About.

Conclusion

The “Airprint Printer Not Found Iphone” error can be frustrating, but by following these troubleshooting steps, you can usually resolve the issue. Start with basic checks and progress to more advanced solutions as needed. Regularly updating your devices and ensuring they are properly connected to the network can help prevent this issue from recurring.

We hope this guide helps you resolve the AirPrint issue. If you have any other methods or tips that worked for you, please share them in the comments below. If this guide was helpful, don’t forget to like and subscribe. Thanks for reading, and happy printing!