Hey everyone! If your HP Printer Says Not connected To Internet But It Is, don’t worry. In this guide, we’ll cover four simple solutions to get your printer back online. Although I’m using the HP DeskJet All-in-One printer as an example, these steps can apply to most HP DeskJet models. Let’s get started!

Solution 1: Restart Your Modem or Router

image 69
HP Printer Says Not connected To Internet But It Is 3

The first and easiest step is to restart your modem or router. Sometimes, the WiFi network itself may have issues that prevent your printer from connecting.

Steps:

  1. Unplug Your Modem and Router: Disconnect the power cables from both your modem and router.
  2. Wait for 30 Seconds: Leave them unplugged for at least 30 seconds. This allows the devices to fully reset.
  3. Plug Them Back In: Reconnect the power cables to your modem and router.
  4. Wait for Reconnection: Give your network a few minutes to reconnect and stabilize.

Why This Works:

This process resets your internet connection, which can resolve any temporary network issues that might be affecting your printer.

Solution 2: Wait and Try Again

Sometimes, the problem can be as simple as a temporary glitch in your internet service.

Steps:

  1. Wait a Few Minutes: Just be patient and wait for a few minutes.
  2. Try Reconnecting: After waiting, attempt to reconnect your printer to the WiFi network.

Why This Works:

Internet connectivity issues can be fleeting. A brief wait might resolve minor interruptions without further action.

Solution 3: Restart Your Printer

If restarting your network devices doesn’t help, try restarting your printer.

Steps:

  1. Unplug the Printer: Disconnect the power cable from your printer.
  2. Wait for 30 Seconds: Leave the printer unplugged for at least 30 seconds.
  3. Plug It Back In: Reconnect the power cable and turn the printer back on.

Why This Works:

Restarting the printer can clear any internal glitches or errors that might be preventing it from connecting to the WiFi network.

Solution 4: Reset the Printer’s Network Settings

If the previous steps don’t work, you may need to reset your printer’s network settings. This process can vary by model, so consult your printer’s manual for specific instructions.

Steps for HP DeskJet

  1. Press and Hold Buttons: Press and hold the Cancel button and the WiFi button simultaneously.
  2. Wait for Reset: Hold the buttons until the network settings reset. This usually takes a few seconds.

For Other Models:

Refer to your printer’s manual or HP’s official support page for the exact steps to reset the network settings for your specific model.

Why This Works:

Resetting the network settings can resolve persistent connection issues by clearing out any incorrect settings or network errors.

Vide: HP Printer Says Not connected To Internet But It Is

HP Printer Says Not connected To Internet But It Is

Conclusion

If your HP DeskJet printer is not connecting to WiFi, these four solutions should help resolve the issue. Start with the easiest steps like restarting your modem/router and waiting a few minutes. If that doesn’t work, proceed to restart your printer and, as a last resort, reset the printer’s network settings.

By systematically following these steps, you can get your printer back online and ready to print in no time. If you found this guide helpful, please give it a thumbs up and leave a comment below. Don’t forget to subscribe for more useful tips and tutorials!

Happy printing!