Tired of tangled Wi-Fi cables? This guide will show you how to connect your HP DeskJet Plus 4100 printer wirelessly using WPS (Wi-Fi Protected Setup). WPS offers a quick and convenient way to establish a secure connection between your printer and your Wi-Fi network.

How to Use WPS with HP DeskJet 4100 Printer

Important Note:

Not all routers support WPS. Check your router’s manual or manufacturer’s website to confirm compatibility.

What You’ll Need

  • Your HP DeskJet Plus 4100 printer
  • Your Wi-Fi network name (SSID) and password
  • A WPS-enabled router

Finding Your WPS PIN

  1. Power On: Turn on your HP DeskJet Plus 4100 printer using the power button.
  2. Navigate the Display: Locate the display panel on your printer.
  3. Press and Hold Buttons: Simultaneously press and hold the wireless button and the information button on your printer’s control panel for a few seconds. This will prompt the printer to print a network configuration page.
  4. Locate Your WPS PIN: The printed page will display your printer’s WPS PIN. This PIN is typically an 8-digit number and is valid for 2 minutes. Make sure to note it down before it expires.

Connecting via WPS

  1. Access Your Router Settings:
    Open a web browser on your computer or mobile device and access your router’s configuration settings. Consult your router’s manual for specific instructions on how to do this.
  2. Locate WPS Settings:
    Navigate to the WPS section in your router’s settings menu. The exact location might vary depending on your router model.
  3. Initiate WPS Connection:
    Choose the option to initiate a WPS connection using your router’s interface. This might involve pressing a physical WPS button on your router or following on-screen instructions.
  4. Enter WPS PIN:
    Within the designated timeframe (usually 2 minutes), enter the WPS PIN you obtained from your printer’s network configuration page.
  5. Wait for Connection:
    Your router will establish a secure connection with your HP DeskJet Plus 4100 printer. This process might take a few minutes.

Congratulations! Your HP DeskJet Plus 4100 printer is now connected wirelessly to your Wi-Fi network using WPS.

Additional Tips

  • Download the HP Smart App: The HP Smart app simplifies printer management and can be used to verify your wireless connection.
  • Check Network Status: If you encounter any difficulties, check your network connection and ensure your router is functioning properly.

FAQ

Q: My router doesn’t have a WPS button.

A: Not all routers support WPS. Refer to your router’s manual or manufacturer’s website to confirm compatibility.

Q: I can’t find the WPS PIN on my printer.

A: Make sure you followed the steps outlined above to print the network configuration page. The WPS PIN will be displayed on that page.

Q: My printer won’t connect using WPS.

A: There might be a temporary issue with your router or printer.
Restart your router and printer.
Try initiating the WPS connection again within the 2-minute timeframe.
If the issue persists, consider connecting your printer using the traditional Wi-Fi setup method (refer to your printer’s user manual).

Happy Printing!